Dynex DX-19LD150A11 Bedienungsanleitung Seite 41
- Seite / 48
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Troubleshooting
37
DX-19LD150A11
Troubleshooting
Video and audio
Warning
Do not try to repair your TV/DVD combo yourself.
Contact authorized service personnel.
Problem Solution
Picture does not fill
the screen. There are
black bars around
the picture.
• Change the aspect ratio. An increasing
amount of digital TV and movies are
presented in wide screen (16:9). See
“Adjusting the TV picture” on page 21.
No picture (screen is
not lit) and no
sound.
• Press on the TV/DVD combo or the
remote control.
• Make sure that the video cables are
connected securely to the back of your
TV/DVD combo.
• Adjust the contrast and brightness.
See “Adjusting the TV picture” on
page 21.
• Make sure that the power cord is
plugged in.
• Make sure that the correct video input
source is selected. See “Selecting the
video input source” on page 17.
• Try another channel. The station may
be experiencing problems.
• Make sure that the incoming signal is
compatible.
• Make sure the antenna or cable TV is
connected correctly and securely. See
“Connecting a cable or satellite box”
on page 8 or “Connecting an antenna
or cable TV (no box)” on page 10.
• Check the closed caption settings.
Some TEXT modes can block the
screen.
Dark, poor, or no
picture (screen is lit),
but sound is good.
• Try another channel. The station may
be experiencing problems.
• Make sure that the antenna or cable TV
is connected correctly and securely.
See “Connecting a cable or satellite
box” on page 8 or “Connecting an
antenna or cable TV (no box)” on
page 10.
• Make sure that Audio Only option is
set to Off. See “Playing TV audio only”
on page 23.
• Adjust the brightness. See “Adjusting
the TV picture” on page 21.
• Make sure that the correct picture
mode is selected. See “Adjusting the
TV picture” on page 21.
• If you are using an antenna, the digital
channel signal may be low. To check
the digital channel signal strength, see
“Checking the digital signal strength”
on page 26.
• If you are using an antenna and the
signal strength is low, adjust the
antenna or use a highly directional
outdoor antenna or set-top antenna
with a built-in amplifier.
• Make sure that the video cables are
connected securely to the back of your
TV/DVD combo.
• The video cable(s) you are using may
be bad. Try a new set.
• Try another channel. The station may
be experiencing problems.
No color, dark
picture, or color is
not correct.
• Try another channel. The station may
be experiencing problems.
• Adjust the color saturation. See
“Adjusting the TV picture” on page 21.
• Make sure that the video cables are
connected correctly and securely to
the back of your TV/DVD combo.
• Make sure that the antenna or cable TV
is connected correctly and securely.
See “Connecting a cable or satellite
box” on page 8 or “Connecting an
antenna or cable TV (no box)” on
page 10.
• If you are using an antenna, the digital
channel signal may be low. To check
the digital channel signal strength, see
“Checking the digital signal strength”
on page 26.
• If you are using an antenna and the
signal strength is low, adjust the
antenna or use a highly directional
outdoor antenna or set-top antenna
with a built-in amplifier.
Only snow (noise)
appears on the
screen.
• Try another channel. The station may
be experiencing problems.
• Make sure that the antenna or cable TV
is connected correctly and securely.
See “Connecting a cable or satellite
box” on page 8 or “Connecting an
antenna or cable TV (no box)” on
page 10.
• If you are using an antenna, the digital
channel signal may be low. To check
the digital channel signal strength, see
“Checking the digital signal strength”
on page 26.
• If you are using an antenna and the
signal strength is low, adjust the
antenna or use a highly directional
outdoor antenna or set-top antenna
with a built-in amplifier.
Dotted lines or
stripes appear on
the screen.
• Make sure that the antenna or cable TV
is connected correctly and securely.
See “Connecting a cable or satellite
box” on page 8 or “Connecting an
antenna or cable TV (no box)” on
page 10.
• If you are using an antenna, the digital
channel signal may be low. To check
the digital channel signal strength, see
“Checking the digital signal strength”
on page 26.
• If you are using an antenna and the
signal strength is low, adjust the
antenna or use a highly directional
outdoor antenna or set-top antenna
with a built-in amplifier.
• Make sure that the video cables are
connected securely to the back of your
TV/DVD combo.
• The video cable(s) you are using may
be bad. Try a new set.
• Other devices (for example, surround
sound receiver, external speakers, fans,
or hair dryers) may be interfering with
your TV/DVD combo. Try turning off
one device at a time to determine
which device is causing interference.
Once you have determined which
device is causing interference, move it
further from the TV/DVD combo to
eliminate the interference.
Double images. • Use a highly directional outdoor
antenna, cable TV, or satellite TV.
Problem Solution
DX-19LD150A11_11-0915_MAN_ENG_V4.book Page 37 Monday, August 29, 2011 8:29 AM
- DX-19LD150A11 1
- Dynex DX-19LD150A11 2
- 19” LCD TV/DVD combo 2
- Contents 2
- CHILD SAFETY 5
- Important safety instructions 6
- Cautions 7
- End of life directives 7
- Non-active pixels 7
- Installing the stand or 8
- TV/DVD combo components 8
- Back Side 9
- Remote control 10
- Making connections 11
- Connecting power 12
- From cable TV 14
- To Cable-in jack on the 14
- Connecting a VCR 16
- Connecting a computer 17
- Connecting headphones 18
- Connecting a USB flash drive 18
- Using the remote control 19
- Turning on your TV/DVD combo 20
- Understanding the basics 21
- Using the DVD player 21
- Viewing photos 22
- Using the on-screen menus 23
- Select Move Return 24
- Adjusting the picture 25
- Language 26
- Transparency 26
- Power On In Vivid Mode 26
- Adjusting the sound 27
- Changing channel settings 28
- Hiding channels 29
- Viewing a favorite channel 30
- Setting parental controls 31
- Open Source Notice 32
- Reset to Default 32
- Using closed captioning 35
- Adjusting time settings 37
- Adjusting menu settings 38
- Restoring default settings 39
- Maintaining 40
- Troubleshooting 41
- Disc playback 43
- USB photo display 43
- Specifications 44
- Programming universal remote 45
- Legal notices 46
- One-year limited warranty 47
- Dynex Televisions 47
Verwandte Produkte und Handbücher für LCD-Fernseher Dynex DX-19LD150A11
LCD-Fernseher Dynex DX-LCD19 Spezifikationen
(124 Seiten)
(124 Seiten)
LCD-Fernseher Dynex DX-LCD37 Spezifikationen
(50 Seiten)
(50 Seiten)
LCD-Fernseher Dynex DX-LCDTV19 Spezifikationen
(50 Seiten)
(50 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 1.296 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern