Connecting your speakers
1 Strip approximately 1/2" of insulation from the ends of
your speaker wire (not provided).
2 Connect the positive wire on your audio equipment to
the red (+) speaker terminal, by pushing the red (+) lever
on the terminal, inserting the wire, then releasing the
lever.
3 Connect the negative wire on your audio equipment to
the black (-) speaker terminal the same way.
See the documentation that came with your amplier or
home theater system for more information on connecting
the cables.
Note: For best performance, speaker wires must be connected
correctly. All two-conductor wire is marked in some way to help with
this. One side will be marked with a colored stripe, raised rib, or
dierent-color conductor. Use the marked side for the “red”
connections. We recommend using 18-gauge or heavier speaker wire.
Congratulations on your purchase of a
high-quality Dynex product. Your 2-Way
Bookshelf Speakers are designed for reliable
and trouble-free performance.
Package contents
• Speakers (2)
• Quick Setup Guide
Positioning your speakers
Left and right speaker outputs are shown on the home
theater amplier speaker connectors. Arrange the
speakers accordingly.
Right
speaker
Left
speaker
Before using your new product, please read these instructions to prevent any damage.
Quick Setup Guide
4" 2-Way Bookshelf Speaker Pair
|
DX-SP115
Amplier/home theater system
Note: Make sure to
connect the + terminal on
the speaker to the
+ terminal on the amplier
and connect the - terminal
on the speaker to the
- terminal on the
amplier.
Back of
amplier
Back of speaker
Kommentare zu diesen Handbüchern