Dynex DX-E402 Bedienungsanleitung PDF herunterladen (Seite 5)

Setting up and using your router

Warning: Unplug your router and keep your hands dry to avoid electrical shock.

To connect your hardware:

1 Turn off your computer(s), your cable or DSL modem, and the router. You may need to

unplug the device if no power switch is available.

2 Locate the Ethernet cable that connects your modem and computer. Unplug that cable

from your modem, and plug it into LAN Port 1 port on the back of the router.

3 Connect the supplied Ethernet cable to on the WAN port back of the router.

4 Connect the other end of the supplied Ethernet cable to your modem, in the port that's

now free.

5 If needed, connect additional computers, switches, or hubs to the LAN ports on the

router.

6 Connect the power adapter to the power connector on the back of the router, then

plug the other end into a power outlet. The router starts to work automatically.

RESET

Switch or Hub

To LAN 1

To WAN

LAN

To power

Internet

To LAN

XDSL Cable

Ethernet

1 2 3 4 5 6 7 8 9 10 ... 70 71

Keine Kommentare

Dynex DX-E402 Bedienungsanleitung Seite 5