Dynex DX-GB8PRT Bedienungsanleitung PDF herunterladen

Power port Ports 1-8

Power LED LEDs 1-8

Network

storage

Switch

Router

Modem

Internet

Modem Router SwitchInternet

Power cord

Switch

Power

outlet

PC Switch

Network

storage

DX-GB8PRT

8-Port Gigabit Ethernet Switch

Congratulations on your purchase of the DX-GB8PRT Dynex 8-Port

Gigabit Ethernet Switch. The DX-GB8PRT provides increased speed and

backbone connections to make Gigabyte a reality.

Safety Notices

• Do not use this product near water, for example, in a wet basement

or near a swimming pool.

• Avoid using this product during an electrical storm. There may be a

remote risk of electric shock from lightning.

• Do not place heavy objects on the switch.

• Allow room for adequate ventilation.

Package contents

• DX-GB8PRT Dynex 8-Port Gigabit Ethernet Switch

• Quick Setup Guide

Features

• Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.1p

standards

• Eight 10/100/1000M RJ45 ports

• Supports IEEE 802.1p QoS

• Support Green Ethernet technology to implement power saving

features. (In Low Power Idle mode, up to 66.22% of the power can be

saved.)

• Supports IEEE 802.3x ow control for full-duplex mode and

backpressure for half-duplex mode

• Non-blocking switching architecture that forwards and lters

packets at full wire-speed for maximum throughput

• 8K entry MAC address table of the DX-GB8PRT with auto-learning

and auto-aging

• Supports for Jumbo frames of up to 15 KB

• LED indicators for monitoring power, link, and activity

Components

Front panel

Back panel

QUICK SETUP GUIDE

Installing the switch

1 Connect the power adapter to the switch and power outlet.

2 Connect the PC(s) and other device(s) to the switch.

3 Connect the switch to the Internet.

4 Install complete connection.

LED indicators

When the switch is plugged in and receiving power, the LED indicators

respond as follows:

LED

Power

Link/Act

Ports 1-8

Status

On (green)

O

On (orange)

Flashing (orange)

On (green)

Flashing (green)

Indication

Power on

No device is connected to the corresponding port.

A 10/100 Mbps device is connected to the corresponding port.

A 10/100 Mbps device is transmitting or receiving data

through the corresponding port.

A 1000Mbps device is connected to the corresponding port.

A 1000Mbps device is transmitting or receiving data through

the corresponding port.

DX-GB8PRT_10-1124_QSG_V1.eps 1 10/29/2010 1:05:26 PMDX-GB8PRT_10-1124_QSG_V1.eps 1 10/29/2010 1:05:26 PM

FINAL

FOR PRINT

1 2

Inhaltsverzeichnis

Seite 1 - QUICK SETUP GUIDE

Power port Ports 1-8Power LED LEDs 1-8Network storagePCSwitchRouterModemInternetInternetModem Router SwitchInternetPower cordSwitchPoweroutletPC Switc

Seite 2 - Contact Dynex

ENGLISH 10-1124Troubleshooting1 The power LED is not lit Make sure that the power adapter is connected correctly and the power outlet is supplying p

Kommentare zu diesen Handbüchern

Keine Kommentare

Dynex DX-GB8PRT Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Computerzubehör Dynex DX-GB8PRT herunter. Dynex DX-GB8PRT User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerzubehör Dynex DX-GB8PRT